Is iad seo a leanas na réamhchúraimí maidir le hailt uiscedhíonach cábla rialaithe tionsclaíoch a shuiteáil:
1. Before installing the industrial control cable waterproof connector, be sure to read the manufacturer's product manual carefully. This is especially important for 10KV and above cables. Think about all the processes before doing it.
2. Do not use too much force when pressing the copper pipe, as long as it is crimped in place, the copper end face after crimping is bound to have many raised points, this must be flattened with a file, and no burrs should be left.
3. The outer semiconductor shield is a semi-conductive material that acts as a uniform electric field outside the insulation of the cable and the joint. Like the inner semiconductor shield, it plays a very important role in the cable and the joint.
4. When making the joint, the inner shielding layer of the joint of the conductor part of the crimping tube must be restored, and a part of the inner semiconductor shield of the cable must be reserved, so that the inner shielding of the connector on the connecting tube can communicate with each other.
Go hachomair, beidh go leor réamhchúraimí le linn suiteáil cónaisc uiscedhíonach cábla rialaithe tionsclaíoch. Dá bhrí sin, is fearr an tógálaí agus an t-úsáideoir araon lámhleabhar an mhonarcha a léamh go cúramach, agus déan cinnte nach bhfuil siad i mbun léitheoireachta. Ardaítear na fadhbanna a thuigeann tú chun iad a réiteach in am, ionas go seachnófar contúirt go pointe áirithe.







