+8618149523263

Conas an ceamara faireachais a shreangú?

Dec 30, 2021

1. Ba cheart go mbeadh voltas rátáil níos mó ná voltas oibre an chuaird ag an sreang a úsáidtear le haghaidh ceamaraí faireachais; ba cheart go gcloífeadh insliú na sreinge le modh suiteála an chuaird agus le coinníollacha comhshaoil ​​an leagain. Ba cheart go mbeadh an t-achar trasghearrtha den sreang in ann riachtanais an tsoláthair chumhachta agus an neart meicniúil a chomhlíonadh.


        2. When wiring the surveillance camera, try to avoid wires with joints. Unless it is impossible to use a connector, the connector of the surveillance camera must be crimped or welded, and the wire connection and branch should not be subjected to mechanical force. The wires that are empty in the pipe should not have connectors under any circumstances. If necessary, put the connectors on the probe terminal of the junction box as much as possible.


        3. The wiring of the surveillance camera should be installed horizontally or vertically in the building. The wiring should be protected by sleeves (plastic or iron water pipes, optional according to the technical requirements of indoor piping), and metal hoses can be used for the ceiling wiring, but they need to be fixed and secure.

V8rGdN8QRimbsx9_RCLrBg

4. Ní féidir le líne comhartha an cheamara faireachais a bheith comhthreomhar leis an líne chumhachta ardchumhachta, gan trácht ar rith san fheadán céanna. Más rud é mar gheall ar shrianta comhshaoil, ba cheart na sreanga a ródú go comhthreomhar, agus ba chóir go mbeadh an t-achar níos mó ná 50cm.


        5. The AC power supply of the alarm control box of the surveillance camera should be routed separately. The surveillance camera should not be placed in the same tube with the signal line and low-voltage DC power cord. The installation of the AC power cord should comply with electrical installation standards.


        6. The wiring from the alarm control box of the surveillance camera to the ceiling is required to be managed in the wall or protected by iron pipes to improve the anti-sabotage performance of the anti-theft system.


        7. The technical requirements of indoor piping for surveillance cameras: There are two types of surveillance camera wiring and piping. The piping of the surveillance camera is required to be horizontal and vertical, neat and beautiful. Concealed piping requires short, unobstructed, and few elbows.

Glaoigh Linn